CHIP BLOCK

2.1 Weigh shavings, sawdust

2.2 Weigh the glue

- Weigh the glue according to the ratio of kg/batch. Glue we use is urea formaldehyde glue, with high adhesive.

2.3 Put ingredients into automatic mixing tank

- After weighing all the ingredients, the workers put the ingredients weighed in batches into the automatic mixing tank

2.4.  Put the mixture into mold of heat press machine

 - Then, we put the mixture of ingredients after being mixed into the mold of the heat press machine. The temperature and the pressure is set by our experienced workers. Normally, it will be press at the temperature between 130-160 degree C.

2.5 Cutting

 - The semi finished products after hot pressed, will be cut at the dimendions our customer required. The moisture content of products will be below 12%, when it is completely cool, it will be below 10%.

2.6 Packaging

- After the product is completely cool, it will be pack into bundles and tied up carefully with plywood pallets. 4 corners of bundles will be kept fixed with plywood and wrapped with plastics.

2.7 Loading

Bundles are loaded into containers and ready to be shipped to our customers.

APPLICATIONS OF CHIP BLOCK

Chip block is often used in the manufacture of pallets because of many advantages such as:

• - Increase the weight capacity of the pallet
• - Easy to move and protect goods in transit
• - Helps reduce the cost of goods and increase competitiveness in the market
•    

OUR QUALITY CERTIFICATION

During over 10 years in plywood industry, our company always try to serve our customer with most suitable and qualified products. Here are some certificates that indicate the specifications and quality of our plywood, which has been exported to the US, India, Korea, Malaysia, Japan, etc.